Please take a brief moment to read below.
The battery charge will last about as long as a filter/cartridge tip around 50-80 puffs depending on how you draw on the e-cig. It will take around 1 to 2 hrs to charge from dead flat, if possible once you are finished, pop it on charge for next time.
The atomizer screws onto a charged battery and it is what creates the vapor for you to inhale giving you the feel of a real cigarette, replacements are available.
Please try not to play with the atomizer as they are easy to break.
These are your cartridge filters that hold the flavour and nicotine level, it contains a small internal capsule that has a seal over it , when you place this onto the atomizer the seal is pierced and the liquid released then enjoy your e – cigarette. Once Placed onto atomizer please wait a minute or so for the liquid to soak into the atomizer. Do not remove filter until it is finshed (noVapour or Taste).
Problems
If you put a new filter onto you atomizer and you don’t get any vapour after waiting for a sort while pull filter off atomizer and check that the atomizer has pierced the seal on the capsule inside the filter housing, use a needle or toothpick to pierce the seal.
Sometimes you need to hold the e – cig where the filter joins , or the atomizer to the battery to insure you can get a good inhale of product they have a habit of sometimes being to loose on letting air into filter.
If the light blinks just as you in hale , the battery is flat, recharge
If the light blinks while inhaling for a short period , this means that you have over inhaled and the battery has stopped supply.
Below is how the whole thing is assembled:
You will also find that there is a car charger, wall plug for Australia and usb cord in the box + a box of filters.
We also have replacement parts and cartridges of all sorts of flavours available, please email us at electrocig@bigpond.com for more info.
